Hydraulic oils
ТУ У 23.2-30802090-090:2008Agrinol AMT 300 and Agrinol AMT-300T oils are intended for use in closed systems of production as heat-carrying agent, excluding the contact with hot air. Agrinol AMT-300 oils’ maximum allowable temperature with intense forced circulation is not more than 280 ° C, as for oil Agrinol AMT-300T intense forced circulation – not more than 300 ° C. Guarantee period of storage - 5 years from the day of manufacture.
| Index name |
Agrinol
AMT-300 |
Agrinol
AMT-300Т |
| Kinematic viscosity at 100°С, mm²/s,not less than |
5,9 |
5,3 |
| Acid number, mg КОN/g, not more than |
0,03 |
0,05 |
| Temperature, °С: |
|
|
- flash temperature in an open crucible, not lower than
- solidification temperature, not higher than |
175
285 |
170
325 |
| - minimum auto-ignition, not less than |
−30 |
−23 |
| |
|
|
| Fraction of total mass, %, not more than: |
|
| - mechanical impurities |
None |
| - water |
None |
| Colour, units of CNT, not more than |
6 |
– |
| Refraction index, not less than |
1,54 |
1,58 |
| Fractional composition, °С, not more than: |
|
|
| - 5 % (volume) boils |
330 |
– |
| - 95 % (volume) boils |
475 |
– |
| Density at 20°С, kg/m³, not more than |
960 |
995 | |
|
|
There are no translations available
ГОСТ 10877-76
Консервационное масло К-17 (смазка К-17) применяется для долговременной защиты от атмосферной коррозии изделий и механизмов, хранящихся под укрытием.
Гарантийный срок хранения – 3 года со дня изготовления.
Таблица 55
| Наименование показателя |
К-17 |
| Внешний вид |
Вязкая маслянистая жидкость темно-коричневого цвета |
| Вязкость кинематическая при 100°С, мм²/с |
15,5–21,0 |
| Температура застывания, °С, не выше |
−22 |
| Массовая доля, %, не более: |
|
|
- механических примесей |
0,07 |
|
- воды |
Отсутствие |
|
- свободных органических кислот |
0,40 |
|
- свободной щелочи в пересчете на NaOH |
0,05 |
| Зольность, % |
1,35–2,40 |
| Защитные свойства |
Выдерживает | |
|
Agrinol MZ
ТУ У 23.2-30802090-023-2004 Petroleum hardening oils Agrinol MZ are utilized for hardening steel products. Guarantee period of storage – 2 years from the day of manufacture.Table 66
| Index name |
AgrinolМZ-8 |
AgrinolМZ-16 |
Agrinol MZ-38 |
Agrinol
MZ-90 |
Agrinol
MZ-120 |
|
|
| Appearance |
Homogeneous transparent oily liquidfrom light yellow to light brown |
|
| Kinematic viscosity at 40°С, mm²/s,not less than |
8–11 |
20–24 |
25–36 |
120–160 |
190–250 |
|
| Acid number, mg КОN/g, not more than |
0,5 |
0,5 |
0,5 |
0,5 |
0,5 |
|
| Тemperature, °С: |
|
|
|
|
|
|
| -flash temperature in an open crucible, not lower than |
140 |
160 |
180 |
210 |
235 |
|
| - solidification temperature, not higher than |
−25 |
−15 |
−15 |
−12 |
−12 |
|
| Fraction of total mass, %, not more than |
|
|
| - mechanical impurities |
None |
|
| - water |
None |
|
| Coking ability, %, not more than |
0,2 |
0,3 |
0,4 |
0,4 |
0,4 |
|
| Stability against oxidation, not more than: |
|
|
|
|
|
|
| - viscosity change, % |
5 |
10 |
10 |
10 |
10 |
|
| - changing of acid number, mg КОN/g |
0,1 |
0,15 |
0,2 |
0,2 |
0,2 |
|
| Density at 20°С, kg/m³, not more than |
900 |
900 |
900 |
900 |
900 |
| |
|
ТУ У 23.2-30802090-074-2008Hardening oils Agrinol MZM are utilized for hardening metals.Guarantee period of storage – 5 years from the date of manufacture.Table 67
| Index name |
Agrinol
MZM-16 |
Аgrinol
MZM-26 |
Agrinol
MZM-120 |
| Kinematic viscosity at 50°С, mm²/s, not less than |
14,5-19,0 |
23,5-27,0 |
109-120 |
| Viscosity index, not less than |
– |
85 |
85 |
| Acid number, mg КОN/g, not more than |
0,01 |
0,01 |
0,02 |
| Saponification number, mg KON/g, not more than |
0,05 |
| Temperature, °С: |
|
|
|
| - flash temperature in an open crucible, not lower than |
170 |
200 |
240 |
| - solidification temperature, not higher than |
−12 |
−12 |
−12 |
| Coking ability, %, not more than |
0,15 |
0,2 |
0,5 |
| Colour, units of CNT, not more than |
3 |
5 |
7 |
| Fraction of total mass, %, not more than: |
|
|
|
| - mechanical impurities |
0,01 |
0,01 |
0,01 |
| - water |
Traces |
Traces |
Traces |
| The test for oxidation: |
|
|
|
| - mass loss, %, not more than |
10 |
10 |
3 |
| - kinematic viscosity at 50°С,mm²/с, not more than |
22,5 |
30,5 |
134,0 |
| - Coking, %, not more than |
0,3 |
0,4 |
0,95 |
| - Change of flash temperature in a closed crucible, °С, not lower than |
0 |
0 |
0 |
| Density at 20°С, kg/m³, not more than |
900 |
900 |
920 | |
|
Instrumental OIL MVPAll-Union State Standards 1805-76 Mineral instrumental oil MVP of sulfuric acid refining is intended for lubricating monitoring instruments at temperatures from minus 60 ° C to 110 ° C, filling the oil-pneumatic shock absorbers and in the process of lubricants manufacture.Guarantee period of storage – 5 years from the day of manufacture.Table 70
| Index name |
MVP |
| Kinematic viscosity at 50°С, mm²/s,not less than |
6,5-8,0 |
| Acid number, mg КОN/g, not more than |
0,03 |
| Temperature, °С: |
|
| -flash temperature in an open crucible, not lower than |
125 |
| - solidification temperature, not higher than |
−60 |
| Fraction of total mass, %, not more than: |
|
| - mechanical impurities |
None |
| - water |
None |
| - water-soluble acids and alkalis |
None |
| Ash, %, not more than |
0,005 |
| Colour, units of CNT, not more than |
1,5 |
| Density at 20°С, kg/m³, not more than |
900 | |
|
| |
|
