Hydraulic oils
|
All-Union State Standards 10121-76
Transformer Oil of Selective Refinement is intended for filling in transformers and oil-filled electric equipment.
Guarantee period of storage – 5 years from the day of manufacture. Index Name | Transformer Oil of Selective Refinement | Kinematic viscosity, mm²/s, not more than: | | - at 50°С | 9 | - at 20°С | 28 | - at minus 30°С | 1300 | Acid number, mg КОN/g, not more than | 0,02 | Temperature, °С: | | - flash temperature in a closed crucible, not lower than | 150 | - solidification temperature, not higher than | −45 | Fraction of total mass, %, not more than: | | - mechanical impurities | None | - water-soluble acids and alkalis | None | - phenol | None | - sulphur | 0,6 | Ash level, %, not more than | 0,005 | Sodium test of acidified alkaline extract in the ditch of 20 mm, absorbance, not more than | 0,4 | Transparency at 5°С | Transparent | Colour, units of CNТ, not more than | 1 | Stability according to the statistical method, not more than: | | - acid number of the oxidized oil, mg КОN/g | 0,3 | - water-soluble acids’ content in the oxidized oil, mg КОN/g | 0,03 | - sediment fraction of total mass in the oxidized oil, % | 0,015 | Tangent of dielectric loss angle at 90°С, %, not more than | 2,6 |
|
|
|
All-Union State Standards 982-80
Transformer Oils Т-1500 and ТК are oils of sulphate and selective refinement produced from refined oil. These oils are utilized as the main insulating material for butyric switches and other high-voltage equipment.
Guarantee period of storage – 5 years from the day of manufacture. Index Name | Т-1500 | ТK | Kinematic viscosity, mm²/s, not more than: | | | - at 50°С | 8 | 8 | - at 20°С | – | 30 | | - at minus 30°С | 1100 | – | Acid number, mg КОN/g, not more than | 0,01 | 0,05 | Temperature, °С: | | | - flash temperature in a closed crucible, not lower than | 135 | 135 | - solidification temperature, not higher than | −45 | −45 | Fraction of total mass, %, not more than: | | | - mechanical impurities | None | - water-soluble acids and alkalis | None | Sodium test, absorbance, not more than | 0,4 | 1,8 | Transparency at 5°С | Withstands | Colour, units of CNТ, not more than | – | 1,5 | Stability against oxidation, not more than: | | | - sediment fraction of total mass in the oxidized oil, % | None | 0,1 | - acid number of the oxidized oil, mg КОN/g | 0,2 | 0,35 | - mass of volatile low-molecular acids, mg КОN/g | 0,04 | 0,005 | Tangent of dielectric loss angle, %, not more than: | | 0,25 | - at 90°С | 0,5 | – | - at 70°С | – | 2,5 | Density at 20°С, kg/m³, not more than | 885 | 900 |
|
|
|
|
