Hydraulic oils
|
ТУ У 23.2-30802090-079:2007
The plastic lubricant Agrinol Fiol-2U is utilized for lubricating needle bearings and tongue-and-groove joinings of cardan shaft crosspieces of VAZ and other cars. The major consumers of the lubricant are motor-car factories, motor transport enterprises and car repair garages. The lubricant is efficient at the temperature varying from minus 40°С up to 120°С, (up to 130°С in a short-term period).
Guarantee period of storage - 2 years from the day of manufacture.
|
Index Name |
Agrinol Fiol-2U |
|
Appearance |
Homogenous ointment from dark-grey to black colour |
|
Temperature of drop falling, °С, not lower than |
185 |
|
Penetration at 25°С, mm·10−1 |
255–295 |
|
Efficient viscosity at minus 30°С and at the average gradient of the strain rate of 10 s−1, Pа·s, not more than |
1800 |
| Proof strength at 20°С, Pа |
300-800 |
|
Colloid stability, %, not more than |
12 |
| Evaporation at 100°С, %, not more than |
1,2 |
|
Fraction of total mass, %, not more than: |
|
| - water |
None |
|
- free alkali re-calculated into NaOH |
0,1 |
| Corrosive influence on metals |
Withstands |
|
Water resistance, class, not lower than |
1а;1v |
| Stability against oxidation, mg KON/g, not more than |
2 |
|
Tribological characteristics on ChShM at (20±5)°С, N, not less than: |
|
| - welding loading |
2450 |
|
- critical loading |
980 |
|
- scuff index |
470 | |
|
|
ТУ У 23.2-30802090-069:2007
The lubricant is used for greasing joints and spindles of accelerator drives, disengaging levers, tongue-and-groove joinings, car window raisers, friction units of industrial equipment working at average loading.The major consumers of the lubricant are enterprises of the car making industry and car repair garages. The oil is efficient at the temperature varying from minus 40°С to 130°С.
Guarantee period of storage - 1 year from the day of manufacture.
|
Index Name |
Agrinol LSC-15 |
|
Appearance |
Homogenous ointment from white to dark-yellow colour |
|
Temperature of drop falling, °С, not lower than |
185 |
|
Penetration at 25°С, mm·10−1 |
250–280 |
|
Efficient viscosity, Pа·s |
|
|
- at 0°С and at the average gradient of the strain rate of 10 s−1, not more than |
280 |
|
- at 50°С and at the average gradient of the strain rate of 100 s−1, not less than |
7 |
|
Shearing strength, Pа, not less than: |
|
|
- at 20°С |
500 |
|
- at 80°С |
120 |
|
Colloid stability, %, not more than |
15 |
|
Evaporation, %, not more than |
5 |
|
Fraction of total mass, not more than: |
|
|
- water |
None |
|
- free alkali re-calculated into NaOH |
0,1 |
|
Corrosive influence on metals |
Withstands |
|
Water resistance, class, not lower than |
1v |
|
Stability against oxidation, mg KON/g, not more than |
3,0 |
|
Tribological characteristics on ChShM at (20±5)°С, N, not less than: |
|
|
- welding loading |
1200 |
|
- critical loading |
650 |
|
- scuff index |
260 | |
|
|
ТУ У 23.2-30802090-062:2006
Agrinol №158 is used for greasing frictionless bearings of autotractors, needle bearings of cardan joints with unequal angular velocities.
The lubricant is efficient at the temperature varying from minus 30°С up to 110°С.
Guarantee period of storage - 3 years from the day of manufacture.
|
Index Name |
Agrinol №158 |
| Appearance |
Ointment from blue to dark-blue colour |
| Temperature of drop falling, °С, not lower than |
150 |
| Penetration at 25°С, mm·10−1 |
265–320 |
| Efficient viscosity at 0°С and at the average gradient of the strain rate of 10 s−1, Pа·s, not more than |
400 |
| Proof strength at 50°С, Pа, not less than |
160 |
| Colloid stability, %, not more than |
18 |
| Fraction of total mass, not more than: |
|
| - water, % |
Traces |
| - free organic acids, mg КОN/g |
None |
| - free alkali re-calculated into NaOH, % |
0,10 |
| Corrosive influence on metals |
Withstands |
| Stability against oxidation, mg KON/g, not more than |
3 |
| Tribological characteristics on ChShM at (20±5)°С, N, not less than: |
|
| - critical loading |
617 | |
|
|
ТУ У 23.2-30802090-043:2005
The lubricant is utilized as a greasing material for spherical joints of front suspension, steering control ends of cars. The lubricant is placed in friction units for the entire period of their exploitation. The lubricant is efficient at the temperature from minus 40°С up to 130°С. It possesses advanced water resistance.
Guarantee period of storage - 1 year from the day of manufacture.
|
Index Name |
Agrinol ShRB-4 |
| Appearance |
Low-fibrous ointment of dark-brown colour |
| Temperature of drop falling, °С, not lower than |
200 |
| Penetration at 25°С, mm·10−1 |
265–295 |
| Efficient viscosity at minus 20°С and at the average gradient of the strain rate of 10 s−1, Pа·s, not more than |
800 |
| Shearing strength at 20°С, Pа, not less than |
200 |
| Colloid stability, %, not more than |
10 |
| Evaporation, %, not more than |
10 |
| Fraction of total mass, not more than: |
|
| - mechanical impurities |
0,15 |
| - water |
Traces |
| - free acids re-calculated into oleic acid |
2 |
| Corrosive influence on metals |
Withstands |
| Stability against oxidation, mg KON/g, not more than |
1,0 |
| Changing of the rubber volume, %, within |
±12 |
| Tribological characteristics on ChShM at (20±5)°С, N, not less than: |
|
| - welding loading |
1960 |
| - critical loading |
588 |
| - scuff index |
290 | |
|
|
ТУ У 23.2-30802090-040:2005
The lubricant is used fro greasing joints of equal angular velocities of forward control cars, all-wheel drive cars as well as ball double-roll bearings which are used in the boss units of such cars as VAZ, ZAZ and AZLK. The lubricant remains efficient at the temperature from minus 40°С up to 120°С.
Guarantee period of storage - 5 years from the day of manufacture.
|
Index Name |
Agrinol ShRUS-4 |
|
Appearance |
Homogenous ointment
from dark-grey to black colour |
|
Temperature of drop falling, °С, not lower than |
190 |
|
Penetration at 25°С, mm·10−1 |
250–280 |
|
Efficient viscosity at minus 30°С and at the average gradient of the strain rate of 10 s−1, Pа·s, not more than |
1800 |
|
Shearing strength, Pа: |
|
|
- at 20°С |
300–700 |
|
- at 80°С, not less than |
150 |
|
Colloid stability, %, not more than |
16 |
|
Evaporation, %, not more than |
5 |
|
Fraction of total mass, not more than: |
|
|
- mechanical impurities |
None |
|
- water |
None |
|
- free alkali re-calculated into NaOH |
0,1 |
|
Corrosive influence on metals |
Withstands |
|
Stability against oxidation, mg KON/g, not more than |
3 |
|
Stability against water wash-out, loss of the lubricant’s mass, %, not more than |
5 |
|
Tribological characteristics on ChShM at (20±5)°С, N, not less than: |
|
|
- welding loading |
4900 |
|
- critical loading |
1098 |
|
- scuff index |
559 | |
|
|
|
