Cannon LubricantAll-Union State Standards 19537-83The Cannon Lubricant is intended for protecting surfaces of metal products against corrosion at the temperature from minus 50°С up to 50°С in the conditions of a warehouse storage.Guarantee period of the lubricant storage in metal packing – 10 years from the day of manufacture. Guarantee period of the lubricant storage in cardboard-winding drum – 2 years from the day of manufacture.
| Index Name |
Cannon Lubricant |
| Appearance |
Homogenous ointment from yellow to brown colour |
| Penetration at 25°С without stirring |
90–1501) |
| Temperature of drop falling, °С, not lower than |
60 |
| Sliding temperature, °С, not lower than |
50 |
| Acid number, mg КОN/g |
0,50–1,00 |
| Fraction of total mass, %, not more than: |
|
| - water |
None |
| - mechanical impurities |
0,07 |
| Content of water-soluble acids and alkalis, reaction of aqueous extract |
Subacid
(slightly pink colour) |
| Corrosive influence on metals |
Withstands |
| Test of protective properties at 50°С within 30 h |
Withstands |
) The index is calculated only if the product is going to be exported. |
|
Agrinol ZES ТУ У 23.2-30802090-063:2006Agrinol ZES lubricant is utilized for corrosion ground wire protection and fittings of high-voltage power lines of all voltage classes, as well as various types of machinery, tools and other metal products of ferrous and nonferrous metals in terms of operation, transportation, and storage in open areas. Lubricant can be used in all climatic zones, including the dry and humid tropics. Lubricant protects against corrosion products at the surface temperature ranging from minus 50°C up to 100°C, when operating in sea mist and contact with the sea and fresh water, as well as in direct sunlight and hot surfaces. Guarantee period of storage – 3 years from the day of manufacture.
| Index name |
Agrinol ZES |
| Appearance |
Ointment without balls of dark colour |
| Penetration at 25°С, mm·10−1 |
270–335 |
| Temperature of drop falling, °С, not lower than |
105 |
| Fraction of total mass, %, not more than: |
|
| - water |
None |
| - mechanical impurities |
None |
| Corrosive influence on metals |
Withstands |
| Testing of the protective properties within 24 hours |
Withstands |
| Determination of tendency for slipping |
Withstands | |
|
|
