CIATIM-201All-Union State Standards 6267-74This lithium anti-friction frost-resisting and refractory lubricant is used for greasing rolling and sliding friction units of low loading.The lubricant is intended for greasing friction units of aircrafts, radio engineering equipment, electromechanical and other devices and precision mechanisms, main units of cars and other ground machinery exploited in northern regions and working with a small shearing force at low loading.The lubricant is efficient at the temperature from minus 60°С to 90°С.Guarantee period of storage - 5 years from the day of manufacture.
CIATIM-202All-Union State Standards 11110-75This plastic frost-resisting lubricant is used for greasing frictionless bearings working at the temperature varying from minus 50°С up to 120°С. In the majority of cases this lubricant is inter-changeable with the CIATIM-201 Lubricant.Guarantee period of storage - 5 years from the day of manufacture.
CIATIM-203All-Union State Standards 8773-73This plastic anti-friction lubricant is utilized for greasing mechanism working at high unit loading.The lubricant is intended for greasing toothed, worm gears of reducers, frictionless and slide bearings; various power drives, screw pairs, loaded reducers, mechanisms exploited on open grounds, car friction units.The lubricant is efficient at the temperature from minus 50°С to 90°С.Guarantee period of storage - 5 years from the day of manufacture.
| Index Name |
CIATIM-201 |
CIATIM -202 |
CIATIM -203 |
| Appearance |
Homogenous ointment without balls from light-yellow to light-brown colour |
Homogenous soft ointment from yellow to light-brown colour |
Homogenous ointment of dark-brown or green-brown colour |
Temperature of drop falling, °С,
not lower than |
175 |
175 |
160 |
| Penetration at 25°С, mm•10−1 |
– |
265–325) |
250–3001) |
| Efficient viscosity, Pа•s: |
|
|
|
| - at 50°С and at the average gradient of the strain rate of 1000 s−1, not less than |
– |
– |
1 |
| - at minus 30°С and at the average gradient of the strain rate of 10 s−1, not more than |
– |
1300 |
1000 |
| - at minus 50°С and at the average gradient of the strain rate of 10 s−1, not more than |
1100 |
– |
– |
| Proof strength at 50°С, Pа |
250-500 |
not less than 150 |
not less than 250 |
| Colloid stability, % of the secreted oil, not more than |
26 |
20 |
10 |
| Corrosive influence on metals |
Withstands |
| Stability against oxidation, mg KON/g, not more than |
3 |
– |
3 |
| Fraction of total mass: |
|
|
|
| - water, %, not more than |
None |
None |
– |
| - free alkali re-calculated into NaOH, %, not more than |
0,1 |
0,1 |
0,1 |
- free organic acids,
mg КОN/g, not more than |
– |
None |
None |
| - sulphur, %, not less than |
– |
– |
0,2 |
| Content of mechanical impurities in 1 cm3 of the lubricant, not more than: |
None |
– |
– |
| - diameter from 0,025 mm up to 0,075 mm |
– |
800 |
– |
| - diameter from 0,075 mm up to 0,125 mm |
– |
None |
1000 |
| - diameter more than 0,125 mm |
– |
None |
None |
| Evaporation at 120°С within 1 h, %, not more than |
25 |
8 |
– |
1) The index is calculated only if the product is going to be exported. |
|
